TYPE-A SPR-18 GEN2 Rifle w/15″ Handguard – 223REM/556NATO – Black

Description

We had two things in mind when it came to redesigning the SPR GEN3 Platform; weight reduction and functionality. Our first improvement started with functionality on the lower receiver components. We moved away from standard mil-spec components, upgrading to a ambi billet adjustable 90°/45° short throw fire selector, extended billet magazine release, improved pivot/breakdown pins, and most importantly stainless steel detents/springs/roll pins/trigger pins/etc. Our second functionality improvement came from the upper receiver and since we were on a mission to make this rifle semi ambidextrous, we decided to upgrade to an ambi charging handle. The next upgrade came in the form of weight reduction on the font end. We made some weight improvements on our all new GEN3 SPR/15 handguard by opening up the offsets to accept M-LOK attachments and off-setting an optional 45° QD M-LOK insert towards the backend of the handguard. The last upgrade was to improve the overall gas flow by making improvements to our gas management system from front to back.

This TYPE-A SPR-18 223WYLDE is built on an accurate Long Rifle platform with proven mil-spec components to make it an incredibly versatile rifle. The SPR-18 Long Rifle is equipped with a heavy Mod HBAR 18″ 416R Stainless Steel barrel (for improved accuracy) and a full 15″ free float rail (M-LOK – GEN3) with an ASR Ready muzzle brake to mitigate muzzle rise. Fully furnished with B5 furniture, optic ready, and equipped with a 30 round capacity magazine. The TYPE-A SPR-18 Long Rifles is driven by our TYPE-A QPQ coated bolt carrier group w/R.E.M. Polish. It’s also equipped with our improved TYPE-A PMC Straight 2-stage trigger to give it consistent reliability time after time.

NOTE: All of our rifles are Hardcoat Anodized and then Cerakoted to give you a longer lasting more durable finish. We wanted your rifle to wear to the anodized surface vs. the raw aluminum surface like some of our competitors. Just another added benefit making our rifles…TYPE-A.

BARREL:
Caliber: .223 WYLDE (****Shoots both 5.56 NATO & .223 Remington)
Length: TYPE-A 18″ Mod Heavy Contour Barrel
Gas block: Low Pro Micro .750 Gas Block (Removable) – QPQ Finish
Material: 416R Stainless Steel
Gas System: Rifle Length
Twist Rate: 1:8 twist
Finish: Matte
Thread: 1/2×28
Muzzle Device: ASR Ready Muzzle Brake

UPPER RECEIVER:
Platform: SPR GEN3 Precision Machined 7075-t6 Aluminum Upper Receiver with Extended Feed Ramps
Finish: Anodized Black
Black – MIL-A-8625, Type-III, Class 2
Charging Handle: TYPE-A Ambi Charging Handle

BOLT CARRIER GROUP: QPQ W/R.E.M POLISH CARRIER GROUP
QPQ Coated Semi-Auto Bolt Carrier
QPQ Coated Gas Key (Staked)
Gas Key Hardened to USGI Specifications
Grade 8 Hardened Fasteners

BOLT ASSEMBLY:
QPQ Coated Bolt – Case Hardened, Shot Peened & MPI Tested
Extractor (Fully Assembled)

LOWER RECEIVER:
Platform: SPR GEN3 Precision Machined 7075-t6 Aluminum Lower Receiver
Finish: Anodized Black
Black – MIL-A-8625, Type-III, Class 2
Trigger: TYPE-A PMC 2-Stage Straight Trigger (4.0 lb.)
Extension: 6-Position Adjustable Buffer Tube – Carbine Length
End Plate: TYPE-A QD Single Point End Plate (4140 Pre-Hard)
Fire Selector: TYPE-A Ambi Billet 90°/45° Adjustable Short Throw Selector
Magazine Release: TYPE-A Extended Billet Mag Release
Lower Parts: Stainless Steel/Aluminum Detents & Springs

HANDGUARD/RAIL
Platform: TYPE-A SPR/15 GEN3 M-LOK Handguard (11.7 oz.)
Finish: Anodized Black
Black – MIL-A-8625, Type-III, Class 2

FURNITURE
Stock: B5 Bravo Stock – BLK
Grip: B5 P-Grip – BLK

ACCESSORIES (INCLUDED W/RIFLE):
Magazine: PMAG or Duramag
Soft Case: 36″ Single Rifle Case