Forward Controls Designs – Optics Platform for Glock Pistols – Leupold Delta Point Pro (OPF-G, DPP)

Do not use OPF-G, DPP with Holoson SCS320, it will damage the plate.

GLOCKOPF-G, DPP is compatible with GLOCKs that use GLOCK’s Set 01 plates (17, 19, 20, 21, 22, 23, 26, 34, 40, 45, 47, 49).  G40 (10mm) uses Set 02 plates that are slightly wider, while OPF-G, DPP still works with it, it will not completely fill the MOS cut’s width.

OPF-G, DPP is compatible with the EOTech EFLX, but the DPP sight screws to plates are longer, if you are buying OPF-G, DPP for use with EFLX, be sure to use the screws that came with your EFLX sight.  DO NOT use DPP sight to plate screws with EFLX.

OPF-G, DPP (Optics Platform, Forward Controls, Delta Point Pro) is the latest member of the OPF line.  OPF-G, DPP uses the same proven design of the OPF-G, RMR to keep the Delta Point Pro immobile, the simplest and most effective way to prevent sight to plate mounting screws from loosening and shearing.

While Leupold’s Delta Point Pro uses 4 recoil lugs (twice as that of the RMR’s) and beefier mounting screws, the challenges of keeping the sight on the plate without loosening or shearing the sight to plate screws are not very different from those of the RMR.  OPF-G, DPP has a front and rear fence, the tight tolerances of the plate to slide, and sight to plate insures minimum movement along the bore in recoil.

OPF-G, DPP ships with 2 plate to slide screws (M3 0.5mm x 6mm), 2 Delta Point Pro screws (M4 .7×15.8mm), a T10 and a T15 wrench.  The screws included with the Delta Point Pro are the same screws that ship with the Dela Point Pro, the 2 screws we provide are simply spares.  A torque wrench is necessary to properly install both the plate to slide, and sight to plate screws.

Billet machined in 4140, hat treated and black nitride coated.

Due to the DPP’s rather tall height, it requires equally tall backup sights for lower 1/3 co-witnessing.

OPF-G, DPP is a collaboration between Tangodown and FCD.  Proudly designed and made in the USA.

NOTE:

We will soon stop including the L keys with all OPF products, L keys will become optional, we strongly suggest a proper torque wrench to impart the correct torque value.

 WARNING: This product can expose you to chemicals including metallic nickel, chromium and lead, which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Forward Controls Design nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, components or accessories.

For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.