Rex Silentium – MG22 Extreme Duty Suppressor – Black Nitride Finish – 22LR/22WMR/17HMR/5.7×28

Description

TOUGH RIMFIRE CAN FOR HIGH VOLUME SHOOTERS… scrub it, scrape it, run it! NOW with BLACK NITRIDE FINISH!!!

The MG22 was born of the MG series rifle suppressors. 100% hardened 17-4 Stainless Steel (190KSI tensile strength) for extreme duty and high volume shooting in all rimfire cartridges. No aluminum to damage by either excessive shooting or lack of cleaning! Designed for up to 9 length configurations, it allows the user to tune the weight and desired suppression level to their liking. It is built to run and run.

Clean it or not… it will take it. Go ahead, scrape off the baffles with your pocket knife. The MG22 doesn’t care!

A 100% no-fault lifetime warranty comes standard, as with all of our products. If you kill it, we fix it, no BS!

Keep it clean and remember that after cleaning use some ablative gel (petroleum jelly or similar no toxic gel) on all internal parts before reassembly. The wipe can easily be replaced as a repair item by you or a gunsmith.

According to current BATFE guidance, repairing the wipe by direct replacement is allowed but making and keeping spares is NOT! Contact your legal counsel and or the NFA branch of BATFE for more information. We do not sell replacement wipes.

FEATURES:

• Rated for: 22LR, 22WMR, 17HMR, 17WSM, 5.7×28, 22 hornet (no barrel length restrictions)
• Configuration Lengths: 6.5″ approx 0.47″ per baffle (CONFIGURE FROM 1 to 10 BAFFLES!!!)
• Configurations Weights: 7.4oz whole assembly, each baffle weighs 0.6oz
• 100% Hardened 17-4 SS (hardened to 190,000 PSI tensile strength) takes all the extreme abrasion and high pressures
• Baffles seal to each other via tapers for concentricity
• BLACK NITRIDE FINISH for even easier cleaning and durability (new as of summer 2021)
• Repairable High-Strength High-Temperature Silicone Rubber Cap Wipe (McMaster-Carr item 5787T63 and Punch 3427a17)
• REMOVE WIPE FOR ALL OTHER CARTRIDGES EXCEPT 22LR RIMFIRE!
• Full Auto rated
• Easy to service and reconfigure
• Easy to own
• 100% no-fault warranty, valid across the known universe and until the end of time
• Won’t break the bank

Full length Configuration ***Sound Levels

• 6″ Buckmark Pistol
  • Standard Velocity 22LR: 120dB
  • Subsonic 22LR: 117dB
• 16″ Ruger 10/22
  • Standard Velocity 22LR: 120dB
  • Subsonic 22LR: 116dB
• 18″ Ruger RPR 17HMR
  • Standard Velocity (2400FPS) 17HMR: 125dB

*** We measure Sound Pressure Levels 1M left of the muzzle of the suppressor, 1.6M above the ground ***